How to Sand and Refinish Hardwood Floors | Budget Dumpster

Refinishing your hardwood floors will ensure they withstand the test of fourth dimension, protecting them from any break and tear your family throws at them. If you ’ ve been putting this project off due to the price tag, you should know that redoing your floors doesn ’ t have to cost you a fortune .
Sanding and refinishing your hardwood floors as a DIY project is a time investment, but it is less expensive than paying a professional. Refinishing your floors yourself can cost between $ 500 and $ 1,000 depending on square footage. You can expect to pay a professional $ 3 to $ 4 per square foundation to complete the same plan .

“ Our house is 1,200 square feet and it ’ s reasonably much all hardwood…the quotation mark we received was around $ 4,000 and we spent $ 600 doing the stick out ourselves, so we ended up saving $ 3,400. ”
Sarah Gibson | Designer & Blogger, Room for Tuesday

Pro Tip: When refinishing your hardwood floors, you may want to consider staying somewhere else. This project can take more than three or four days. During some stages of the project, you will not be able to step on the deck for at least 24 hours .

How to Tell if Your Hardwood Floor Should Be Refinished

Before you start, determine what character of flooring you have and what express it is in .
To determine what type of wood flooring you have :

  • Remove a floor air vent and look at the ends of the flooring.
  • If you see solid wood at least ¾ of an inch thick, you’re good to move forward.
  • If you see individual layers of thin wood, this is an engineered floor. Refinishing engineered wood is not a DIY project and you should hire a professional.

To determine if your floor needs to be refinished :

  • Place a few drops of water on the floor.
  • If the water beads and doesn’t absorb within a few minutes, your floors are fine.
  • If the water absorbs immediately or within the first minute, it is time to refinish your floors.

Materials and Tools Needed for Refinishing Hardwood Floors

Refinishing a deck requires several tools you probably don ’ t have on pass. Visit your local hardware store to rent the equipment .
Equipment to rent:

  • Orbital sander or drum sander (an orbital is easier for a beginner to control)
  • Power hand sander

When renting the equipment, necessitate for a demonstration and make sure you know precisely how to work the machine before taking it out of the storehouse .
You will besides need the adjust size of sandpaper and pads for each machine. What grit of sandpaper should you use to sand your hardwood floors ? You will need three different levels of sandpaper to complete this project .
You will use a unlike grit for every passing over the floor. Depending on the state of matter of your floors, you will want :

  • 30 to 40 grit sandpaper for your first pass.
  • 50 to 60 grit sandpaper for your second pass.
  • 80 to 100 grit sandpaper for your third pass.

Additional Materials Needed for Refinishing Hardwood Floors:

To Wear: Dust mask Goggles
To Prep the Room: Plastic sheeting Painters tape
Hardwood floor cleaner Putty knife
Cotton rags Wood filler
Nail set Shop vacuum
Mineral spirits Sanding screen, 120 grit
To Apply Finish: Polyurethane floor finish Paintbrush
Lamb’s-wool applicator Paint tray

If you are staining the deck you will besides need :

  • Interior stain
  • Paintbrushes
  • More cotton rags

Prep Your Home

Before you ’ re cook to refinish your hardwood floors, you must empty the room and thoroughly clean the floors .
Follow these steps to prepare your family :

  • Start by clearing the room of furniture, curtains and decorations.
  • Remove doors and shoe molding. Removing molding is optional, but it will help prevent damage. If you choose to remove it, use tape to number the pieces and the coordinating wall so you know where each piece belongs.
  • Inspect the floor for any nails that are not flush with the floor. Use the nail set, a small metal tool used for driving nails below the surface of hardwood, to ensure no nail heads are sticking up. Nails not flush with the floor will tear the sandpaper and slow your progress.
  • Repair any existing damage to the floors, like holes or scratches, with wood putty and a putty knife.
  • Clean floors with hardwood floor cleaner.
  • Cover doors, vents, windows and surfaces with plastic sheeting and painters tape. This will prevent dust from traveling throughout your house.

“ I would besides recommend removing all baseboards – this step isn ’ thymine necessity, but it makes the visualize much easier. We ’ ll be adding newfangled molding throughout the home plate, so it wholly made smell to trash the existing baseboards anterior to the floor visualize. ”
Sarah Gibson | Designer & Blogger, Room for Tuesday

immediately you ’ re ready to begin refinishing your hardwood floors.

Sanding Hardwood Floors

Sand and Refinish Your Hardwood Floors

Prepare your drum sander by attaching the coarsest backbone of sandpaper. Position your drum sander to go with the granulate of the wood. If your floor is warped, go diagonal with the grain, but never go completely against the wood grain. Once you ’ rhenium ready, follow these steps to sand your hardwood floors .
Pro tip: Wear a front mask and goggles to protect yourself from the dust and earplug to protect your hearing .

Steps to Sand Your Hardwood Floors:

  • Begin moving the machine forward as you turn it on. If you stay in one place for too long, you will damage the floor.
  • Move at a steady, even pace and let the machine do the work as you follow the grain across the room. Do not push the sander.
  • When you get to the other side of the room, move over and pull back slightly overlapping the next pass a few inches with the previous one, about one floorboard’s width. You don’t need to turn the machine around as it can move in both directions with the same effect.
  • Check the sandpaper frequently to make sure it isn’t worn out. Change it as it does wear out, using the same grit of sandpaper until you’ve covered the whole room once. Also, if the sander has a dust collecting bag, empty it often so it doesn’t add weight to the machine.
  • Cover the whole room, getting within a few inches of the walls and corners. After completing one trip around the whole room, turn off the machine before you stop moving.
  • Apply the same grit of sandpaper to the hand sander. Use it to finish the edges of the room. Move in a semicircular motion, overlapping the completed area to help it blend in.
  • Use the vacuum to clean the floor before beginning the second round of sanding.
  • Repeat all steps twice more, changing the grit of the sandpaper each time. Use the 50 to 60-grit for the second pass and the 80 to 100-grit for the third pass.

After these steps, the floor should look like fluent, untreated wood. If the floor even feels rough or lines from the drum sander are still visible, buff it using the sanding screen. This should remove any visible fine scratches left by the drum sander .
After the hale floor feels smooth, clean the room again. This time use the void and a muffle pout to ensure no dust is left behind .
Use a clean cotton rag to wipe the shock with mineral spirits to remove any tracing of chemicals from the wood. then, leave it to dry .
Stain Your Hardwood Floor to Add Color

Stain Your Hardwood Floor to Change the Color

Staining is an optional step. If you ’ rhenium looking for a trendy night shock, blot is the way to go. If you want to stick with the natural coloring material of the forest, skip this dance step and move on to the polyurethane ending. Staining your floor will add at least one whole day to your project time .
After selecting a color, try it out on a piece of bit woodwind to ensure you like it. then, follow the instructions on the can .

Tips for Staining Your Hardwood Floor:

  • Apply stain with a paintbrush or cloth, going with the grain of the wood.
  • Remove any excess stain with a rag before moving on.
  • Stir your stain every 10 to 15 minutes.
  • Let dry between coats and apply as many coats as needed to achieve ideal color.

“ We started in the corner of each room and worked our way toward the doorway. After a section is dispatch, it ’ south super authoritative to wipe and absorb all excess stain with a houseclean application launching pad ! I wiped the shock five planks at a time. Don ’ triiodothyronine be fooled by the curler applicator at the home improvement shop. We tried using it for one room and it did not go well. You can control the staining serve much easier when done by pass ! It ’ sulfur neat, more even, and takes less fourth dimension to dry. ”
Sarah Gibson | Designer & Blogger, Room for Tuesday

Pro tip: Do not wear shoes on a recently stained floor .

Apply Finishing Coats to Hardwood Floors

This is the final and most important step when refinishing your hardwood floors. This coating seals your floors and protects them from future damage. If you stained your floors, wait until the stain is wholly dry. adjacent, clean the floors thoroughly with a vacuum. Any scandal, debris or hair on the floor will become trapped under the coating coat .
Polyurethane comes in both water and oil-based types. Oil-based will add a warm golden incandescence to your floors, but dries slower than the water-based option. Water-based polyurethane will keep the natural color of the woodwind and besides dry faster. You must ensure the room is well-ventilated before applying either one. Wear your facemask during this dance step american samoa well .
Before starting, remove any extra bull from the lamb ’ s-wool applicator. Run the vacuum over it and then consumption painters tape to get rid of every last piece .

Steps for Applying Finish to Hardwood Floors

  • Begin by using a paintbrush on the perimeter of the room. Cover about 12 inches of the floor from the wall toward the center of the room. Work in the direction of the wood grain.
  • Keep your brush wet and try to avoid bubbles and drips.
  • Once the perimeter is complete, use the lamb’s-wool applicator to do the rest of the room.
  • Remember to work your way towards the exit, while still applying with the grain. Once you begin to apply the polyurethane, you will not be able to step on the floor.
  • You will want to apply at least two coats, more in highly trafficked areas. Wait 24 hours before completing additional coats. Depending on temperature and humidity, you may need to wait longer.

Some brands of polyurethane will require sanding between coats, but others won ’ thymine. Consult the container for instructions. If you do sand between coats, be sure to clean thoroughly to get rid of all the dust.

once you ’ ve completed the desire count of coats, simply wait for them to dry and then you ’ re done ! You can begin walking on your refinished hardwood floors 24 hours after adding the final coat. Wait a week ( or equally long as possible ) before moving furniture back into the room to prevent rub .
Have you refinished hardwood floors before ? Let us know how it went in the comments !
Completing more home improvement projects ? Take a search at our Home Project Guides to learn how to budget for a kitchen recast, efficiently declutter your home plate or prepare for a storm .

reference :
Category : Finance

Related Posts

How to Calculate Credit Card Interest Rates

interest rates are one of the ways to work out how much it will cost you to use your credit card, along with other charges and fees….

What debt collectors can & cannot do

If you are dealing with a debt collector, you have protections under the law. A debt collector must not mislead, harass, coerce or act unconscionably towards you….

Can You Afford a New Home? How to Determine Your Homebuying Budget

Can You Afford a New Home? How to Determine Your Homebuying Budget As with any major purchase, determining what you can afford before you look for a…

Why Did My Credit Score Drop?

Why Did My Credit Score Go Down When Nothing Changed? sometimes your mark does change based on factors outside of your control, but most times your behavior…

Why Do I Owe Taxes To The IRS & How To Avoid Them

Are you wondering why you owe indeed much in taxes this year ? Want to make certain you never owe a big tax bill – or any…

The 5 reasons why your credit score might suddenly drop

Select ’ s editorial team works independently to review fiscal products and write articles we think our readers will find useful. We earn a perpetration from affiliate…